BrownieBoards Store – A BrownieBrand Store

This is the “official” version of the 3DR Solo Accessory Bay Breakout board, designed by ProfiCNC, and referenced by the official 3DR Solo documentation. The design is open-source (files are on GitHub, along with the Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) license that cover them). (We are neither affiliated with or endorsed by … Continue reading 3DR Solo Reference Breakout Board

3DR Solo Power Adapter Board

READ FULLY BEFORE ORDERING August 2020 Update: We have updated this product with a higher-quality XT-60 connector (more flexible wires and easier to disconnect). The pigtail is now only 10cm long rather than 15cm: We found that the original 15cm length could be awkward and too long for most applications. The new 10cm length is … Continue reading 3DR Solo Power Adapter Board

3DR Solo CubeID Connector Board

Integrate a CubeID with your Solo!

3DR Solo Standard Breakout Board

This breakout board connects to the 3DR Solo Accessory Bay connector and breaks out all connections (even the non-factory-connected ones). The kit also includes mounting screws for securing the 3DR Solo Breakout Board to your 3DR Solo. This prevents the board from becoming separated from the 3DR Solo during flight. Options include headers (installed or … Continue reading 3DR Solo Standard Breakout Board

3DR Solo Micro Breakout Board

This board contains all connections from the Solo accessory bay port, broken out into three 10-pin 0.1″ pitch headers. The board is designed so it does not extend over the edge of the Solo bottom. Available options: Your choice of headers: None, Kit, or Installed (note that when selecting ‘kit’ from the options bar, the … Continue reading 3DR Solo Micro Breakout Board

3DR Solo Nano Breakout Board

This is currently our smallest breakout board for the 3DR Solo accessory bay port. If you choose the ‘no mounting hole’ version, the board is smaller than the connector! Only the most common ports are broken out to a 10-pin 0.1″ header. Those pins are: 3DRID (USB ID pin) USB GND USB D- USB D+ … Continue reading 3DR Solo Nano Breakout Board

SyncLight

This listing is for quantity one (1) of our popular SyncLight boards. An overview is given below, but see our product page for more information. This high-power LED board is lightweight and tiny, a perfect fit for RC planes and quadcopters for extreme visibility during dusk/nighttime flights. We’ve tested visibility out to 5 miles in … Continue reading SyncLight

3DR Solo SyncLight Kit

This kit, designed for the 3DR Solo, contains 2 SyncLights, and the breakout board necessary to power the boards. The breakout board leverages the 3DR Solo’s accessory port and mounting holes for easy integration with the Solo. See our product post for more information on the SyncLight, and the store page for more information about … Continue reading 3DR Solo SyncLight Kit

3DR Solo SyncLight Breakout Board

This breakout board connects to the 3DR Solo Accessory Bay connector and breaks out all connections (even the non-factory-connected ones). SyncLight Connections This board specifically has connections to power and synchronize four of our SyncLight anti-collision lights. The button on this board allows you to change the blink pattern of the SyncLights. Please note that … Continue reading 3DR Solo SyncLight Breakout Board

3DR Solo Power Connector – Molex 46436-9202

READ FULLY BEFORE ORDERING This connector, a genuine Molex 46436-9202 will mate with the power contacts (and power contacts only) on your 3DR Solo. Please note that this connector DOES NOT HAVE the split-power contacts used for SMBus. If you use/integrate this connector for the Solo, YOU are responsible for knowing what the consequences of … Continue reading 3DR Solo Power Connector – Molex 46436-9202

SyncLight Pattern Change Board (Generic)

This board is a convenient way to power and synchronize our SyncLight boards. The button allows you to change the pattern on the SyncLights. Two versions of the board are available for purchase: Basic – Allows up to four SyncLights to be powered and synchronized. Advanced – Allows up to eight SyncLights to be powered and synchronized, … Continue reading SyncLight Pattern Change Board (Generic)

SyncLight Heatsink Addition

This product is an addition to the SyncLight Board (not included), useful for if you’re using more demanding strobe patterns and the board is getting too hot for your liking, or if you just want additional thermal relief. Whatever the case may be, this heatsink comes with thermal tape and hardware to secure the … Continue reading SyncLight Heatsink Addition